Wiring the Console

Front view of our Page 3/12 console used in this documentation.

 

 

 

Rear view of our Page 3/12 console used in this documentation.

 

 

 

Rear view showing the various connections between the boards and organ components.

 

 

Note the ribbon cable connecting the console interface on the console side panel with the input and output boards mounted vertically on the wood backplane (added by Carlton Smith).  Logic power is fed to the interface and to each input and output board with a red/black pair of 18-gauge and a 2-pin Pancon connector.  Also note the blue CAT5 cable feeding the interface board at the top left-side.

 

 

A clearer picture of the interface card:

 

 

The USB connector and the 20-pin connector above the display are currently not used.  The yellow label in the center of the board designates the unique serial number of the interface board.

 

 

 

Close view of input boards AA-AD (AE is off screen).  Blue labels designate input boards.

 

 

Wires exiting from the top of the input boards connect to the keyboards, stops and pistons.  They are 24-gauge solid telephone cable wires.

 

 

 

Close view of output boards BA-BD.  Red labels designate output boards.

 

 

Wires exiting from the top of the output boards connect to the stop magnets and indicators.  They are also 24-gauge solid telephone cable wires.

 

Copyright © 2016  by Uniflex Relay Systems